Forklift Forks RFQ Forms

Outside of a pallet forks that properly fits your application, the most critical area in determining what fork is right for your machine is its fork capacity and lifting. Lifting forks must ALWAYS meet or exceed the capability/capacity of the machine that will use them. This is a vital lifting safety precaution, NEVER use forks that cannot pick up what the machine is rated to carry. If you are unsure and need assistance in finding the right fork for you application, contact us and we will help get you the right fork for the job, our forks are the most dependable pallet forks that you can find on the market!

Shaft or Pin Type Forks

Shaft mounted or pin-type forks, are commonly used on telehandlers, wheel loaders, and forklifts over 15,000 pounds capacity. Instead of mounting on flat, notched steel, shaft-mounted forks ride on a round bar.

Pin-Type-Forks-1
Generic Shaft Mount
Fork With Positioner
Positioner Selection
L Lug
Shaft Type w/ Clip
L Lug Fork
Shaft Type w/ Pad

ITA Forklift Forks

All-Pro Fork carries a wide range of class 1, 2, 3, and 4 forks in various popular lengths to meet virtually any fork need. For ordering or questions, please call and speak to any of our expert fork technicians. For other options check out our forklift frames and our ITA fork options.

Standard ITA
Non Standard Forks
Rotator Forks
Negative Drop Forks
ITA w/ Positioner Tabs
ita forklift forks

Pallet Fork Specifications

See why ALL-Pro Forks is the most dependable forks on the market as well as reviewing out pallet fork specifications and references of our products.

Quality

  • Two step shot blasting provides a better surface and an excellent finish.
  • Cr40 Alloy Steel rolled to a 6:1 proportion and forged to a 3:1 proportion.
  • Clear cold stamping on the shank indicating the fork pedigree and capacity ratings.
  • Tested to guarantee a 3:1 static safety ratio and a 1.5:1 dynamic safety ration and subject to 1 million cycles of fatigue/yield testing.
  • Material analyzation to ensure the correct steel formulation.
  • Conforms to ISO2328 and ISO2330 standard production process. After attaching hardware (clips or bushings) is welded each fork is heat treated with a tightly regulated 12 hour heat treatment.
  • Standard ITA clips are precision welded to our forks to ensure consistent quality, spacing and square position on each fork.

Versatility

  • A wide selection of ITA. We carry 1A, 2A, 3A, and 4A forks are in stock, as well as blank and shaft mounted forks.
  • Virtually any size can be ordered for you with quick turnaround. Talk to us about a pre-order for your size and application needs and we will be happy to have them on hand to meet your supply demands.
  • Specialty forks are available!
  • Blank Forks, Square Hook Mounted Forks, Lumber/Plywood/Gypsum Forks, and Bucket Forks!
  • All capacities are rated on a 24” load center.

Vaule

  • Our personalized service and knowledgeable staff provides you with your fork needs in a timely and cost efficient manner. Whether you need a standard ITA fork or something a little more specialized we have the experience to help you get the tools to make your job easier.
  • We are able to work with specific requests on stocking levels and product demands. Every effort is made to keep your supply line consistent and reliable.
  • Prices are specifically set to keep you in the game and profitable. Price sensitivity in today’s market is key, and ALL-PRO FORKS is the partner to help you meet your budget.
  • Timely service keeps you up and running, saving you time and money.