ITA Forklift Forks

ITA Forks, also called “clip” and “hook” type forks,  are the industry standard for forklift forks and the most common type.

These forks are designed to hang on the forklift carriage with opposing top and bottom "hooks" that engage the lower and upper carriage fork bars.

The load capacity of ITA forklift forks varies depending on the product. It is important to choose a set of ITA forks with a load capacity that is suitable for the materials you will be handling.

No, ITA forklift forks are not compatible with all forklifts. It is important to choose a set of ITA forks that are compatible with your specific make and model of forklift.

Yes, some ITA forklift forks are suitable for outdoor use. However, it is important to check the product specifications and choose a set of ITA forks that are designed for outdoor use, if necessary.

There are many ways a fork can become worn over time. The most common reasons for a worn fork are the following: 

1. Dragging Forks on the Ground: This is one of the most common factors and also the reason why you should drive with the fork four to six inches above the ground. Driving with the fork off the ground will also increase stability of the forklift while driving. 
2. Frequently Sliding the Forks Back and Forth on the Carriage: Doing this can cause your fork hooks to erode. It is important to keep both the upper and lower carriage bars regularly greased to reduce friction and wear. 
3. Other Common factors that will cause wear on your fork:
   1. Everyday wear and tear,
   2. Misuse, such as improper lifting techniques,
   3. Improper forklift chain tension
   4. Overloading
   5. Improper forklift attachments.  
   6. Operating in harsh environments, such as abrasive surfaces
   7. Operating at high speeds
   8. Lack of maintenance, such as failing to lubricate or tighten bolts
   9. Machinery age and extended use
   10. Poor quality or design of the forks
   11. Exposure to corrosive materials.

Do's for forklift forks:

1. Regularly inspect for cracks, damage or excessive wear.
2. Maintain proper blade alignment.
3. Lubricate moving parts.
4. Use appropriate attachments for specific loads.
5. Replace worn or damaged forks promptly.
6. Follow the manufacturer's recommended load capacity.
7. Replace Forks in pairs 

Don'ts for forklift forks:

1. Don't overload the forks.
2. Don't use damaged or worn out forks.
3. Don't use forks that are bent, twisted or misaligned.
4. Don't exceed the recommended blade length for your lift truck.
5. Don't exceed the recommended load center for your forks.
6. Don't exceed the manufacturer's recommended load capacity.
7. Don't attempt to repair forklift forks